DN250 HDPE WATER SUPPLY PIPE SDR11 TO 26

Send Inquiry
DN250 HDPE WATER SUPPLY PIPE SDR11 TO 26
Details
The DN250 HDPE pipe is a medium to large-sized general pipe diameter used in municipal water supply and drainage, mining transportation, agricultural irrigation and other fields. It possesses the advantages of high strength, corrosion resistance, wear resistance and long service life, and is currently one of the most widely used engineering pipes. We have a professional production line that can meet the requirements for manufacturing various types of HDPE pipes with different wall thicknesses, including DN250. We can produce SDR11-26, with a corresponding pressure-bearing capacity ranging from 0.6 to 1.6 Mpa, to meet your personalized requirements.
Category
Water Supply System
Share to
Description
DN250 HDPE
       Product Introduction

The DN250 HDPE pipe is a medium to large-sized general pipe diameter used in municipal water supply and drainage, mining transportation, agricultural irrigation and other fields. It possesses the advantages of high strength, corrosion resistance, wear resistance and long service life, and is currently one of the most widely used engineering pipes. We have a professional production line that can meet the requirements for manufacturing various types of HDPE pipes with different wall thicknesses, including DN250. We can produce SDR11-26, with a corresponding pressure-bearing capacity ranging from 0.6 to 1.6 Mpa, to meet your personalized requirements.

 

 

01

High Quality

ISO9001 and CE certifications provide dual guarantees

02

Advanced Equipment

Jinwei brand HDPE extrusion equipment and Haitian brand HDPE injection pipe fittings production line.

03

Professional Team

An experienced purchasing engineer with 8 years of work experience and a production line worker with decades of experience.

04

Custom Service

Support customization of mold wall thickness and laser marking

 

 

DN250 HDPE PIPE Technical parameters

Nominal outside diameter (DN) 250mm
Standard dimension ratio (SDR) 11,13.6,17,21,26
Nominal wall thickness (e) Calculated according to SDR, e = DN/SDR
Pipe grade PE100
Density Approximately 0.94 - 0.965g/cm³
Oxidation induction time ≥20min (200°C, PE80); ≥20min (210°C, PE100)
Connection method Electrofusion connection, hot fusion connection and flange connection
Color Generally black, and other colors such as blue are also available

 

 

 

 

 

do you have any question?

DN250 HDPE WATER SUPPLY PIPE

298

Can DN250 HDPE pipes be used for Output pipeline of the pumping station?

 

 

The cutting surfaces on a vertical end mill bit (are for milling ) are on its sides , designed for cutting horizontally , a drill bit ( are for drilling ) cutting surface is at its tip , designed for cutting vertically downward .. you'll notice a end mill usually has a flat on the end of the bit .

 

Can DN250 HDPE pipes be used in transportation in industrial and mining enterprises?

The cutting surfaces on a vertical end mill bit (are for milling ) are on its sides , designed for cutting horizontally , a drill bit ( are for drilling ) cutting surface is at its tip , designed for cutting vertically downward .. you'll notice a end mill usually has a flat on the end of the bit .

How to repair the leakage of SDR11 DN110 HDPE water supply pipes?

How to repair the leakage of DN250 HDPE water supply pipes?

The cutting surfaces on a vertical end mill bit (are for milling ) are on its sides , designed for cutting horizontally , a drill bit ( are for drilling ) cutting surface is at its tip , designed for cutting vertically downward .. you'll notice a end mill usually has a flat on the end of the bit .

What should be noted when installing SDR11 DN110 HDPE pipes outdoors?

What should be noted when installing DN250 HDPE pipes outdoors?

The cutting surfaces on a vertical end mill bit (are for milling ) are on its sides , designed for cutting horizontally , a drill bit ( are for drilling ) cutting surface is at its tip , designed for cutting vertically downward .. you'll notice a end mill usually has a flat on the end of the bit .

 

Our Service

Luoyang Zhengju New Material Technology Co., Ltd.

01

Product supply

 

Provide various specifications of HDPE pipes according to different usage scenarios and working conditions requirements.

02

Transportation service

According to your requirements, we can customize the packaging and arrange the freight services for you.

03

After-sales service

Provide installation instructions. In case of any quality issues or discrepancies with the description during the product's usage, we offer support for returns and exchanges.

Drainage System Manufacturer

 

 

Hot Tags: dn250 hdpe water supply pipe sdr11 to 26, China dn250 hdpe water supply pipe sdr11 to 26 factory

Send Inquiry